LED RC2

Control Remoto para:

Flat PAR CWWW9 

Flat PAR CWWW18

Flat PAR QA5

Flat PAR QA5X

Flat PAR QA5XS

Flat PAR QA12

Flat PAR QA12X

Flat PAR QA12XS

Flat PAR QWH5

Flat PAR QWH5X

Flat PAR QWH5XS

Flat PAR QWH12

Flat PAR QWH12X

Flat PAR QWH12XS

Mega QA PAR 38

Mega TriPar Profile Plus

Mega Par Profile Plus

Mega 64 Profile Plus

VBAR PAK

VPAR PAK

Pinpoint Go Color

RGB 3C IR

RGBW4C IR 

--

FUNCIONES:

Blackout - Pressing this button will blackout the fixture.
PROGRAM SELECTION - This button has multiple functions depending on the fixture used. It can activate Auto Run, or activate/shut off the LCD Display of the fixture, scroll through the preset colors and programs.
FLASH - This button will activate the strobe effect. You can control the flash rate by pressing the
“+” and “-” buttons. Press this button again to exit strobe mode.
SPEED - Press this button and use the “+” & “-” buttons to adjust the speed of the Auto run.
DMX MODE - This button will let you select which DMX mode you want to use. Some fixtures will
come with different DMX channel modes. This button will switch between the different
modes. Please see your corresponding fixture in this user manual to find out
about your DMX modes, values, and traits.
SOUND ACTIVE - This button activates sound active mode. Sound active mode will not work for
outdoor LED lights.
SLAVE - This designates the fixture as a slave fixture in a master/slave configuration.
SET ADDRESS - Press this button to set the DMX address. Press this button first, then press the
numbers to set the address. Example: DMX Address 1 Press “S001”
DMX Address 245 Press “S245”
R G B A W- Press either one of these buttons, and then press the “+” and “-” to adjust the brighness.
“+” and “-” - Use these butt

++++ PRECIO ESPECIAL OFERTA HASTA FIN DE STOCK ++++
++++ PORTE POR 1 SOLA UNIDAD 9€ Y PORTE GRATIS AL ADJUNTAR A CUALQUIER OTRA COMPRA++++